Manuals & Software
for DIAGNOSTICS

Here you will find all diagnostic programs
for equipment and trucks

Diagnostic programs allow you to:

  • viewing active and stored errors or events in which deviations in operation occurred;
  • setting and changing system parameters, as well as the current ECM or Flash file configuration;
  • diagnostic tests and calibrations;
  • removing the DPF particulate filter;
  • reflashing and increasing engine power;
  • clearing errors and ECM memory

Depending on the manufacturer, you can use diagnostic programs:


Caterpillar


ET 2024A


Cat Factory Password 18 Digit


CAT Flash Files


Схемы Caterpillar


Volvo


Volvo PTT TECH TOOL


Scania


Scania SDP3


Cummins


Cummins insite


INCAL Tool


Calterm


Cummins Calterm + 50gb Metafiles


Noregon JPRO


Detroit Diesel


Detroit Diesel Diagnostic Link DDDL 8.20 [07.2024]

Detroit Backdoor Password Generator, V1, V2

Detroit Diesel Reprogramming System DDEC, ver. 7.11

Detroit Diesel Calibration Tool DDCT 4.5c1


John Deere


John Deere Service Advisor 5.3


Perkins


Perkins EST 2024A


Mercedes-Benz

Xentry PassThru Mercedes-Benz

Xentry OpenShell XDOS Mercedes-Benz

Mercedes-Benz StarFinder Installation Service


JCB


JCB ServiceMaster


Diagnostic programs on 1 PC, activation - remotely using the pre-installed TeamViewer remote access program
Diagnostic programs

ET 2024, Electronic Technician + Factory Password Generator
for diagnostics

100 $
The program is designed for diagnosing Caterpillar machines and equipment.
Update date: 2024
Download size: 1,05 Gb
Languages: English
Instructions: included
Operating system: Windows 7/8/9/10/11/- 64 bits or 32 bits
Installation: 1 PC (remotely using pre-installed TeamViewer remote access software)
Old versions: 2023A, 2022C; 2022B; 2022A; 2021 A/B/C; 2019C and others
Supported diagnostic equipment: Caterpillar Comm Adapter 3, Nexiq USB-Link 1/2; Communication adapter compatible with RP-1210C (Noregon® DLA+ 2.0 adapter kit, other compatible adapters).
Description:
- View active and stored errors;
- Viewing events in which abnormalities occurred and were recorded by the ECM;
- Display, including graphical and log recording of the status of parameters (temperature, pressure, etc.);
- Configure and/or change system parameters;
- View and change the current ECM or Flash file configuration;
- Carrying out diagnostic tests and calibrations;
- Print reports and diagnostic results.

Cat Factory Password 18 Digit

for programming Caterpillar
100 $
Cat Factory Password 18 Digit — this is the generation of 18-digit CATERPILLAR factory passwords
!!!The price is for ONE password, this is not the Generator itself!!!
Application. It can be used for:
- regenerate and deletes DPF;
- reflashing ECM and increasing engine power;
- clearing errors and ECM memory as a dealer;
- changes in serial numbers;
- changing operating hours;
- programming other ECM parameters
Note. The access code will be generated from 18 digits.
You need to provide the .html file generated by the CAT ET application.
The video instruction show:
how an 18-digit password is used in practice to change the Engine Rating Cat

Flash Files
for programming Caterpillar

50 $
Flash Files - factory firmware for programming Caterpillar ECM (control unit) flash memory.
Search for firmware - by number from ET, or through the serial number.
Cost per Flash File

Volvo & Mack Techtool 2.8.280 APCI 09.2024
for diagnostics Volvo

350 $
Volvo & Mack Techtool 2.8.280 APCI 09.2024 is a diagnostic premium tech tool explicitly developed to diagnose and program Volvo Trucks, busses, and construction equipment. It is also used to diagnose new car models of Mack, Renault, and Nissan UD trucks
Download size: 14 Gb
Languages: English
Operating system: Windows 10
Installation: 1 PC (remotely using pre-installed TeamViewer remote access software)
Supported Hardware: Vocom(88890300/88894000), Nexuq USB link/link2, JPRO/Noregon DLA+, DPA4/5 etc; Full list of adapters
Description: Volvo PTT software is a part of a professional dealer diagnostic kit with all perks. It means that with the aid of this program, car owners can perform all necessary tests and diagnose their vehicles just like a professional car service would.
The tool has a wide collection of error code checks, injector cut-out tests, DPF regen, etc.
Full auto support for the old electrical system 98 (Version 2, 3).
Euro 6 cars support.
Volvo construction equipment diagnostics.
Data storage and offline programming.
Calibration of such parameters as air suspension, electronic controls, and other car systems.
Support of vehicle models and equipment acknowledged by Tech Tool VCADs Pro

Scania SDP3 2.60.2

for diagnostics Scania
100 $
Scania SDP3 2.60.2 2024 - carries out troubleshooting and troubleshooting, changing various parameters, calibrating, updating software of control units.
SDP3 is suitable for trucks and buses, as well as industrial and marine Scania.
A VCI2 or VCI3 adapter is required for operation
OS: Windows 10/11 x64
Installation: downloaded and activated on a 1 PC remotely through the pre-installed TeamViewer
Data update: 2024
Size: 1 Gb
Language: English, Dutch, Spanish, Italian, German, French, Persian, Finnish, Russian, Thai, Turkish, Zwedish, Chinese, Czech, Japanese, Korean, Polish, Portuguese
Supported systems for VCI2 adapter:
APS - air handling
ATA, WTA, CTS and AUS - additional heating, timer, radio
BCS - bus chassis
BWS - bodies
EBS - brake adjustments
EEC - Reducing Emissions
EMS engine management
COO - coordinator
LAS and BBS - closures and alarms
ICL - instrument panel
TCO - tachograph
OPC and RET - gearbox regulation
RTI - traffic information
SMS - suspension control
TPM - Systematic Tire Pressure Monitoring
LDW - Lane Change Alert.
Supported Systems for VCI3 Adapter:
The device is designed to work with vehicles with a production date after 2004.
Scania SDP3 software is an excellent tool with powerful functionality (VCI 3), with such a diagnostic complex, you can carry out dealer-level diagnostic procedures:
work with errors, calibrate and change the parameters of electronic systems, test mechanisms, poll blocks, update software, and also reset service intervals

Cummins insite 9
for diagnostics Cummins

150 $
Cummins insite 9 — this is a electronic service diagnostic program that allows you to troubleshoot Cummins electronic engines
Data update: 2024
Description: It can be used for:
  • View active and stored errors;
  • Viewing events in which abnormalities occurred and were recorded by the ECM;
  • Configure and/or change system parameters;
  • View and change the current ECM or Flash file configuration;
  • Carrying out diagnostic tests and calibrations;
  • Trip and vehicle information;
  • Wiring diagrams and sensor location maps
Language: English, Deutsch, Espanol, Francais, Italiano, Portugues, Dansk, Nederlands, Suomi, Norsk, Svenska, Indonesian, Turkce, Pусски, Chinese, Japanese, Korean, Čeština, Magyar, Polski, Română.
Size: 2 GB
Installation: downloaded and activated on a 1 PC remotely through the pre-installed TeamViewer
remote access program
Operating system: Windows 10 / 11

Cummins insite 8.9.2
for diagnostics Cummins

150 $
Cummins insite 8.9.2 — this is a electronic service diagnostic program that allows you to troubleshoot Cummins electronic engines
Data update: 2024
Description: It can be used for:
  • View active and stored errors;
  • Viewing events in which abnormalities occurred and were recorded by the ECM;
  • Configure and/or change system parameters;
  • View and change the current ECM or Flash file configuration;
  • Carrying out diagnostic tests and calibrations;
  • Trip and vehicle information;
  • Wiring diagrams and sensor location maps
Language: English, Deutsch, Espanol, Francais, Italiano, Portugues, Dansk, Nederlands, Suomi, Norsk, Svenska, Indonesian, Turkce, Pусски, Chinese, Japanese, Korean, Čeština, Magyar, Polski, Română.
Size: 2 GB
Installation: downloaded and activated on a 1 PC remotely through the pre-installed TeamViewer
remote access program
Operating system: Windows 10 / 11

Cummins INCAL Tool V7

for programming Cummins
100 $
Cummins INCAL Tool V7 — this is a program designed to modify and convert INCAL files used in the Cummins INSITE diagnostic and programming software. The program provides various functions that allow users to perform conversions between CAL and INCAL files, as well as repackaging new and old INCAL files for use with specific versions of the INSITE software.
Data update: 12.2022
Description: It can be used for:
  • INCAL to CAL conversion
  • Modified CAL to INCAL conversion for programming vehicles using INSITE with modified calibration files
  • Repackaging of new INCAL files for use in older versions of INSITE (7.6.x)
  • Repackaging of old INCAL files for use in newer versions of INSITE (8.x.x)
  • Repackaging of any INCAL file to remove all passwords
  • Changing the start date of INCAL discs to prevent them from expiring.
Language: English
Size: 45 MB
Installation: downloaded and activated on a 1 PC remotely through the pre-installed TeamViewer
remote access program
Operating system: Windows 10/8/7/Vista/XP

Cummins Calterm 5.14

for diagnostics Cummins
100 $
Cummins Calterm — this is a tool used to monitor Cummins electronic control modules and change the calibration data they contain. Designed for changing fuel calibration parameters and feature settings in an engineering development and testing environment.
The program works in conjunction with the interface of the RP1210 standard (for example, Cummins Inline, Nexiq or CarDaq)
Data update: 2024
Description: It can be used for:
  • diagnose ECU,
  • remove ECU password protection,
  • adapt, program, change ECU configuration,
  • disable ADBlue, DPF,
  • increase power,
  • remove speed limit,
  • etc.
Language: English
Size: 261 MB
Installation: downloaded and activated on a 1 PC remotely through the pre-installed TeamViewer
remote access program
Adapter: DG TECHNOLOGIES DPA5, NEXIQ USB LINK 1, NEXIQ USB LINK 2, NEXIQ USB LINK 3, INLINE 6, INLINE 7, SCANMATIK 2PRO
Operating system: Windows 10/11

Cummins Calterm 5.14 + 50gb Metafiles
for diagnostics and programming

150 $
Cummins Calterm 5.14 + 50gb Metafiles — this is a tool used to monitor Cummins electronic control modules and change the calibration data they contain. Designed for changing fuel calibration parameters and feature settings in an engineering development and testing environment.
The program works in conjunction with the interface of the RP1210 standard (for example, Cummins Inline, Nexiq or CarDaq)
Data update: 2024
List of metafiles via link
Description:
  • diagnose ECU,
  • remove ECU password protection,
  • adapt, program, change ECU configuration,
  • disable ADBlue, DPF,
  • increase power,
  • remove speed limit,
  • etc.
Language: English
Size: 261 MB
Installation: downloaded and activated on a 1 PC remotely through the pre-installed TeamViewer
remote access program
Adapter: DG TECHNOLOGIES DPA5, NEXIQ USB LINK 1, NEXIQ USB LINK 2, NEXIQ USB LINK 3, INLINE 6, INLINE 7, SCANMATIK 2PRO
Operating system: Windows 10/11

Noregon JPRO Professional Diagnostic 2024 v2
for diagnostics

100 $
Noregon JPRO — this is a professional diagnostic solution for all makes and models. Offers extensive multi-brand coverage and comprehensive diagnostics
Data update: 2024
Description: It can be used for:
  • includes enhanced off-highway support and expanded OEM coverage with bidirectional tests for Detroit engines and Detroit Assurance, along with new Bendix features like estimating brake wear life for pads and rotors. There is also a new virtual connection, similar to Virtual Truck, where technicians can simulate diagnostics on off-highway equipment. Additionally, the update brings new bidirectional tests for Komatsu equipment, including cylinder cut-out, DPF service regen, fuel injector performance, fuel leakage, and more.
  • Education and Troubleshooting Features
  • Reporting Features (Vehicle Health, Trip Reports, and LOV Reports)
  • Integration and Configuration Features
  • Heavy-Duty Features for Cummins, Detroit, International, Mack and Volvo, Mercedes-Benz, Paccar, Bendix, Wabco, Ford.
  • Medium-Duty Support for Ford, GM, Isuzu, Sprinte
  • Parameter modification (Mack & Volvo, Cummins, Detroit Diesel and International), DPF regeneration (Mack, Volvo, Cummins, Detroit Diesel, International and PACCAR) and bi-directional testing using proprietary data and faults
  • Displays 99% of heavy and medium duty fault codes with detailed descriptions of OEM level components and trailers.
Language: English
Size: 1 GB
Installation: downloaded and activated on a 1 PC remotely through the pre-installed TeamViewer
remote access program
Hardware requirements:
  • Minimum: 4GB RAM, 20 GB of available hard drive space, at least an Intel Core i3 processor and minimum of a 1024×768 sized monitor
  • Recommended: 8GB RAM, 20 GB of available hard drive space, Intel Core i5 processor
  • USB port for DLA+ 2.0 adapter or other RP1210C-compliant vehicle adapter
  • Noregon recommends using a Panasonic Toughbook, but JPRO will work on any current PC running Windows 8 or Windows 10
Adapter: Only the Noregon® DLA+ 2.0, DLA+ 2.0 Wireless, Trailer Diagnostic Adapter, DLA+, DLA+ Wireless, and DLA+ PLC adapters are supported.
Operating system: Windows 8/10

Noregon JPRO Professional Diagnostic 2023 v4
for diagnostics

100 $
Noregon JPRO — this is a professional diagnostic solution for all makes and models. Offers extensive multi-brand coverage and comprehensive diagnostics
Data update: 2023
Description: It can be used for:
  • includes enhanced off-highway support and expanded OEM coverage with bidirectional tests for Detroit engines and Detroit Assurance, along with new Bendix features like estimating brake wear life for pads and rotors. There is also a new virtual connection, similar to Virtual Truck, where technicians can simulate diagnostics on off-highway equipment. Additionally, the update brings new bidirectional tests for Komatsu equipment, including cylinder cut-out, DPF service regen, fuel injector performance, fuel leakage, and more.
  • Education and Troubleshooting Features
  • Reporting Features (Vehicle Health, Trip Reports, and LOV Reports)
  • Integration and Configuration Features
  • Heavy-Duty Features for Cummins, Detroit, International, Mack and Volvo, Mercedes-Benz, Paccar, Bendix, Wabco, Ford.
  • Medium-Duty Support for Ford, GM, Isuzu, Sprinte
  • Parameter modification (Mack & Volvo, Cummins, Detroit Diesel and International), DPF regeneration (Mack, Volvo, Cummins, Detroit Diesel, International and PACCAR) and bi-directional testing using proprietary data and faults
  • Displays 99% of heavy and medium duty fault codes with detailed descriptions of OEM level components and trailers.
Language: English
Size: 1 GB
Installation: downloaded and activated on a 1 PC remotely through the pre-installed TeamViewer
remote access program
Hardware requirements:
  • Minimum: 4GB RAM, 20 GB of available hard drive space, at least an Intel Core i3 processor and minimum of a 1024×768 sized monitor
  • Recommended: 8GB RAM, 20 GB of available hard drive space, Intel Core i5 processor
  • USB port for DLA+ 2.0 adapter or other RP1210C-compliant vehicle adapter
  • Noregon recommends using a Panasonic Toughbook, but JPRO will work on any current PC running Windows 8 or Windows 10
Adapter: Only the Noregon® DLA+ 2.0, DLA+ 2.0 Wireless, Trailer Diagnostic Adapter, DLA+, DLA+ Wireless, and DLA+ PLC adapters are supported.
Operating system: Windows 8/10

Detroit Diesel Diagnostic Link DDDL 8.20 [07.2024] SP1 DDDL LEVEL 10‐10‐10 Troubleshooting + Backdoor Password
for diagnostics

100 $
Detroit Diesel Diagnostic Link DDDL 8.20 [07.2024] - is a service diagnostic program used for troubleshooting and diagnosing and programming Detroit Diesel engines.
This version provides broad coverage of a variety of Detroit Diesel engines including Series 60, MBE 900/4000, DD13, DD15, DD16 and more.
Size : 2.4 Gb
License: 10 years
Language : English
Operating system : Windows 10/11 x 64
Instructions: included
Installation: Internet download and online installation (remote installation) via TeamViewer
Supported diagnostic equipment: USB-Nexiq, RP -1210C-Compliant Communications Adapter(Noregon® DLA+ 2.0 Adapter Kit, Other Compliant Adapters)
Description: Allows dealer level diagnostic functions.
Dealer level (read equipment - 10, write equipment - 10, equipment level 10).
No programming restrictions
  • Reprogramming the engine control unit
  • Read data in real time with lists and graphs
  • DPF particulate filter regeneration;
  • View active and stored errors;
  • Viewing events in which deviations occurred and were recorded by the control unit;
  • Configure and/or change system parameters;
  • Carrying out diagnostic tests and calibrations;
and many others

Detroit Backdoor Password Generator, V1, V2
for diagnostics

50 $
Detroit Backdoor Password Generator - password generator for accessing and programming protected parameters of control units.
The user enters VIN, Seen and the program generates a password.
Installation: Internet download and online installation (remote installation) via TeamViewer
Operating system : Windows 7/8/10/11
Language : English

Detroit Diesel Reprogramming System DDEC, ver. 7.11
for diagnostics

90 $
Detroit Diesel Reprogramming System DDEC,
ver. 7.11 - designed to perform diagnostic operations and system programming of engines from 2007 to 2013. This tool is for servicing EPA07, EPA10, GHG14 family engines equipped with engines (S-60, MBE4000, MBE900, DD13, DD15, DD16).
Size : 172 Mb
Language : English
Operating system : Windows 7/10/11
Installation: Internet download and online installation (remote installation) via TeamViewer

Detroit Diesel Calibration Tool DDCT 4.5c1 + Metafiles + Calibrations
for diagnostics

90 $
Detroit Diesel Calibration Tool DDCT 4.5c1 + Metafiles + Calibrations - allows you to view and edit control unit parameters.
Use metafiles (.MET), edit calibration files (.CAL)
Language : English
Size : 102 Mb
Operating system : Windows 7/8
Installation: Internet download and online installation (remote installation) via TeamViewer

John Deere Service Advisor 5.3
Database AG(Agriculture) + CF(Construction Forestry) + DTAC Solutions + Playload files
for diagnostics, repair manual

150 $
John Deere Service Advisor, ver. 5.3, offline - t’s diagnostic software that enables users to perform diagnostics for equipment as well as engines made by John Deere.
Update: 04.2023
Size: 450 Gb
Language: English
Type: Repair manual, Diagnostic Software. Offline version
Operating system: Vista, Win 7/8/10/11
Installation: Internet download and online installation (remote installation) via TeamViewer
Supported diagnostic equipment: supports only Genuine JD EDL V3/V2 DLA Adapter kit (The previous version V2 USB and BT is also supported). If you’re using any other diagnostics tool, we do not make any warranties.
Description: This latest version is a comprehensive solution for technicians who perform repairs, diagnostics, and maintenance on John Deere equipment. To begin working with a particular model, simply enter the model name or its PIN
The Electronic Data Link (EDL) is a dealer diagnostic PC-to-vehicle interface that’s compatible with Service ADVISOR software. You can access service manuals and technical assistance center (DTAC) data using a service advisor to perform diagnostics, readings, tests, calibrations, and re-program controllers.
The program features are divided into several main sections, including Manuals, Reprogramming, and Diagnostics. The Manuals section has a more user-friendly web interface, allowing for easy reading and printing of materials via the Web Browser. However, some parts of the manual are only available as PDF files and require Adobe Reader to access. Service Advisor functions are available from the Internet Explorer Web browser. At this moment, this is only one officially supported browser version.

Perkins EST 2024A - Electronic Service Tool
for diagnostics

100 $
Perkins EST 2024A is software used to diagnose diesel engines manufactured by Perkins Engines Company Limited
File size: 511 MB
Installation size: 1,1 GB
Licence: Unlimited
Languages: English, Chinese, Danish, French, German, Italian, Portuguese, Spanish
Instructions: included
Operating system: Windows 8/10/11
Installation: 1 PC. Internet download and online installation (remote installation) via TeamViewer
Old versions: 2022A, 2021A, 2021B, 2020A, 2020B etc.
Supported diagnostic equipment: CAT ET DataLink Adapter III, Nexiq USB Link (Version 1 or 2), DG Technology DPA5, Norgone DLA And some other RP1210 devices
Description:
- View active and stored errors;
- Viewing events in which abnormalities occurred and were recorded by the ECM;
- Display, including graphical and log recording of the status of parameters (temperature, pressure, etc.);
- Configure and/or change system parameters;
- View and change the current ECM or Flash file configuration;
- Carrying out diagnostic tests and calibrations

Xentry PassThru Mercedes-Benz 09.2023
for diagnostics

100 $
Xentry PassThru Mercedes-Benz 09.2023
The program Mercedes DAS Xentry – is intended for diagnostics of any cars of firm Mercedes.
Update: 09.2023
SO: Win 10 x64
For PassThru devices
Installation: 1 PC. Internet download and online installation (remote installation) via TeamViewer
Description: With this program, and the diagnostic adapter can diagnose passenger and commercial cars, trucks and buses produced by Mercedes from 1989 model year. In addition, you can perform diagnostics cars Smart, Cobus, Setra, Mitsubishi Fuso, SharatBenz laksheri class cars and Maybach. Diagnosis of this program will identify a fault in the electronic engine control systems, automatic transmissions, security, air conditioning, ABS, EDS, ESP, cruise control systems and many other helpers.

Xentry OpenShell XDOS Mercedes-Benz 09.2023
for diagnostics

100 $
Xentry OpenShell XDOS Mercedes-Benz 09.2023 – is intended for diagnostics of any cars of firm Mercedes.
Update: 09.2023
SO: Win 10 x64
For multiplexers C4 and C5
Installation: 1 PC. Internet download and online installation (remote installation) via TeamViewer
Description: With this program, and the diagnostic adapter can diagnose passenger and commercial cars, trucks and buses produced by Mercedes from 1989 model year. In addition, you can perform diagnostics cars Smart, Cobus, Setra, Mitsubishi Fuso, SharatBenz laksheri class cars and Maybach. Diagnosis of this program will identify a fault in the electronic engine control systems, automatic transmissions, security, air conditioning, ABS, EDS, ESP, cruise control systems and many other helpers.

Mercedes-Benz StarFinder Installation Service
for diagnostics

90 $
StarFinder для Mercedes Benz – содержит электрические схемы и информацию о расположении на автомобиле элементов электрических схем, включая датчики и разъемы для моделей Mercedes. В каталоге Star Finder используется стандартная нумерация элементов фирмы MB, поэтому для работы с программой необходимо иметь электрическую схему автомобиля.
Installation: 1 PC. Internet download and online installation (remote installation) via TeamViewer

JCB ServiceMaster
for diagnostics

100 $
JCB SERVICEMASTER 4 is diagnostic software for agricultural machinery and engines JCB, contains complete information for diagnostics and calibration of agricultural machinery and engines company JCB.
WINEEM4 is a straightforward tool for monitoring and adjusting the Electronic Control Unit (ECU) of the Sisudiesel engine. This program can be used with ECU models EEM2, EEM3, and EEM4. The communication protocol used to interact with the ECU is the CAN bus.
Update date: 2023
Installation size: 11,7 GB
Licence: Unlimited
Languages: Multilingual
Instructions: included
Operating system: Windows 7/10/11
Installation: 1 PC. Internet download and online installation (remote installation) via TeamViewer
Supported diagnostic equipment: JCB DLA, JCB DLA 2.0, NEXIQ USB LINK 1, NEXIQ USB LINK 2

How we are working

You select the desired Product. Add them to your cart
We send login details online or connect remotely to a PC and
start download/activation
The team supports
unlimited time
program operation
and round the clock feedback
.
News
Answers on questions
Yes, this is the maximum dealer version, all functions work. Validity period: unlimited (10 years license)
Yes, this is the maximum dealer version, all functions work. Validity period: unlimited (10 years license)
Offline programs are downloaded and activated on 1 PC via remote access using the TeamViewer program.
  1. Download the free version of this program
  2. At the designated time you will receive a connection request - you will see it in the program interface, click the "accept" button
  3. Let's start the download. Let's activate it. Setting it up
Do You have any questions?
Write Us
By clicking the button, you consent to the processing of financial data and agree to the privacy policy